|
Your new Invisi-Gard Stainless Steel Security Screens have been manufactured using the highest quality materials available to the security industry. Constructed from Architectural Grade Aluminium and 316 Stainless Steel Mesh, both of these metals are highly corrosion resistant and exceptionally strong. With a moderate amount of maintenance, your Invisi-Gard Stainless Steel Security Screens will retain their good looks, and resist the elements for years to come.
Invisi-Gard Stainless Steel Security Screens are the product of years of development and are designed to resist corrosion and rusting, but as with all external fixtures on your home, they require some maintenance to keep looking good and performing well. Depending on how harsh the environmental elements are, the maintenance period will vary. Refer the suggested maintenance table below.
Your Invisi-Gard Stainless Steel Security Screens should only ever need to be washed down with a soft bristled brush using warm water and a mild detergent. Rinse well with fresh water to remove any detergent residue. Care should be taken to avoid excessive amounts of water entering the main lock and auxillary 3 point locks. Strong detergents and abrasive cleaners should never be used to clean your Invisi-Gard Stainless Steel Security Screens as these may scratch or damage the surface finish.
Periodic lubrication of the main lock and auxillary lock components should only ever be done using graphite powder. Liquid or aerosol lubricants can cause corrosion and damage the locking mechanism.
|
| Suggested Maintenance Period Table |
| Environment |
Recommended Max. Maintenance Interval |
|
Mild
|
Six Months
|
|
Moderate
|
Three Months
|
|
Tropical / Severe
|
Two to Four Weeks
|
| Environmental Definitions |
|
Mild
|
Being rural, away from the coast and remote from industry and urban activity.
|
|
Moderate
|
Being mainly urban, inland and away from heavy industry.
|
|
Tropical/Severe
|
Being coastal/marine, subject to salt deposition and within 15Km of the Eastern Coast, or 10Km of the Western Coast of Australia.
|
|
Warranty Information
Aluminium Specialties Group Pty Ltd A.B.N 63 001 252 259 (ALSPEC) offers the following warranty to the original purchaser of the Invisi-Gard Stainless Steel Security products.
Under the normal conditions of use in a residential - non commercial application, ALSPEC warrant for a period of 10 Years from the date of installation, the Aluminium Framing and Stainless Steel Mesh components of your Invisi-Gard Stainless Steel Security products, to be free of defects in manufacturing and workmanship, when fabricated and installed in accordance with the Invisi-Gard Fabricator Manual.
As with any valued purchase, effective maintenance is essential to prolonging the life of your Invisi-Gard Stainless Steel Security products. To maintain your rights as stated in this warranty, the care and maintenance instructions on the reverse of this warranty form should be followed. Where a claim against this warranty is to be made, initial contact should be made with the licensed Invisi-Gard fabricator shown below. In the event that the original Invisi-Gard fabricator cannot be contacted, then contact should be made with ALSPEC for further assistance.
Aluminium Specialties Group P/L : Phone during business hours: 1300 130 171.
ALSPEC offers this warranty to the original purchaser in addition to statutory warranties under the Trade Practices Act 1974 relating to consumer transactions. This warranty will not apply to damage as a result of abuse, accident, fire, owner disassembly or alteration of the product in any way, installation of non original parts, failure to comply with product safety instructions / warnings, act of God, or failure of the owner to follow the care and maintenance instructions on the reverse side of this warranty form. These exclusions will not contravene any statutory rights that the owner may have and which cannot be modified of excluded.
|
