Customer Support
Care & Maintenance
Your new
Your new
Constructed from Architectural Grade Aluminium and 316 Stainless Steel Mesh, both of these metals are highly corrosion resistant and exceptionally strong. With a moderate amount of maintenance, your
Your
Rinse well with mains water to remove any detergent residue paying particular attention to ensure ALL residue is flushed from the mesh retaining areas of the frame.
Only mains water is to be used as recycled, bore or tank water is unacceptable and may lead to detrimental corrosion effects. Care should be taken to avoid excessive amounts of water entering the main lock and auxiliary 3 point locks.
Strong detergents and abrasive cleaners MUST NEVER be used to clean your
Periodic lubrication of the main lock and auxiliary lock components should only ever be done using graphite powder. Liquid or aerosol lubricants can cause corrosion and damage the locking mechanism.
External contaminants that come into contact with the
To ensure the
Environment | Recommended Maximum Maintenance Interval Indicative maintenance schedule only. |
---|---|
Mild Greater than 10km radius from oceanfront or saline bay. |
Every 6 months |
Moderate Within 1km to 10km radius of an oceanfront or saline bay. |
Every 2 to 3 months |
Marine Within 500m to 1km radius of an oceanfront or saline bay. |
Every 2 to 4 weeks |
Severe Marine Within 500m radius of an oceanfront or saline bay. |
Every 1 to 2 weeks |